LMAB Rodfather Bait Casting Rods are here, these 2nd generation of The LMAB Rodfather bait Casting Rod Series have taken a year in development, with countless hours of testing on the water, repeated optimizations to the detail, along with a lot of hard work has gone into this 2nd generation of LMAB The Rodfather Spinning Rods range.
This LMAB Rodfather Bait Casting Rod series is made to meet the highest quality requirements and to inspire the demanding predator angler. The raw material for the blank is 40T Toray Carbon has been cut in the traditional way and rolled under heat onto the stainless-steel blanks that were specially made for The Rodfather. During the subsequent heat treatment in the oven, the blank receives its power to be finally provided with an ultra-fine clear coating. This coating protects the blank from external influences and damage. The highly modular blank material 40T Toray Carbon offers excellent feedback and at the same time the speed to react extremely quickly to even the lightest of plucks. The powerful backbone LMAB Rodfather Spinning rods helps to get places you need to be even at long distances and at the same time brings the power to drill out largest and strong fish safely. Simple design, sophisticated features and high-quality components LMAB The Rodfather Spinning rods convinces with a simple design, which scores with elegance and attention to detail.
With sophisticated features such as the NHOOK hook keeper from Seaguide, this hook keeper, the hook is hung in the bow, as long as the line is on tension, it holds perfectly and the hook tip stays away from the blank. Other high-quality components come from Fuji are the a Fuji Alconite K-Series guide rings. These rings are lightweight, very quiet and optimize casting performance. Couple, with the Fuji TVS reel seat, which offers the combination of very pleasant ergonomics and optimized feedback. You can feel every pluck, even without a finger on the blank. To ensure that everything is better balanced, a handmade carbon piece has been installed in the handle. As a result, the rods sit perfectly in the hand and do not tire even during extremely long fishing sessions.
The LMAB Flagship Rodfather Bait Casting Rods give you a high-quality Casting Rods, which have only just been released after all the all requirements were met to the highest standard
- Bait Casting rods - 4 models in the range
- 40T Toray Carbon Blank
- Carbon cross winding above hand part for reinforced backbone
- Fuji Alconite K-Series ringing in Frosted Dark Grey
- Handmade carbon piece for better balance
- Fuji TVS Reel Holder
- Seaguide NHOOK Hook Holder
RF-C662ML
The lightest variant is suitable for finesse fishing for perch, but also performs well with small topwaterbaits and twitchbaits for perch, asp and chub. If you like to fish for perch with small spinnerbaits and bladed jigs, you will also like this rod.
RF-C702M
The all-round rod of the series. With it you are in good hands with most baits. Spinnerbaits, bladed jigs, twitchbaits and jerkbaits can be fished perfectly with it.
RF-C702MH
With this rod, developer Enrico Di Ventura particularly likes to hunt zander at night with larger plugs along the stone pack. But it can also be used for light pike fishing on the polder, where it masters not only hardbaits but also spinnerbaits and bladed jigs.
RF-C762H A medium-strength rod that is particularly suitable for pike fishing.
It can be used to fish from a boat or belly boat on polders as well as on larger bodies of water. It is ideal for the usual suspects for pike fishing such as medium-sized shads, various hardbaits and tin baits such as spinnerbaits.
RF-C762XH
The lightest of the "pure" pike rods. With it you can fish for large lures and with its Moderate Fast Action it is ideal for large spinnerbaits, chatterbaits, swimbaits and softbaits.
RC C782XXH
This is the middle of the pike rods. Max 150 g casting weight allows the use of large lures up to the first big baits. Whether spinnerbaits, swimbaits, softbaits or other large lures, thanks to the Moderate Fast action they can be cast and guided well - Please Note this rod has a different butt and handle section than all the other models - Extra EVA handle grips above and below the reel seat.
Back in In Stock Now!!!
View search results for LMAB
LMAB Rodfather Bait Casting Rods
LMAB Rodfather Bait Casting Rods are here, these 2nd generation of The LMAB Rodfather bait Casting Rod Series have taken a year in development, with countless hours of testing on the water, repeated optimizations to the detail, along with a lot of hard work has gone into this 2nd generation of LMAB The Rodfather Spinning Rods range.
This LMAB Rodfather Bait Casting Rod series is made to meet the highest quality requirements and to inspire the demanding predator angler. The raw material for the blank is 40T Toray Carbon has been cut in the traditional way and rolled under heat onto the stainless-steel blanks that were specially made for The Rodfather. During the subsequent heat treatment in the oven, the blank receives its power to be finally provided with an ultra-fine clear coating. This coating protects the blank from external influences and damage. The highly modular blank material 40T Toray Carbon offers excellent feedback and at the same time the speed to react extremely quickly to even the lightest of plucks. The powerful backbone LMAB Rodfather Spinning rods helps to get places you need to be even at long distances and at the same time brings the power to drill out largest and strong fish safely. Simple design, sophisticated features and high-quality components LMAB The Rodfather Spinning rods convinces with a simple design, which scores with elegance and attention to detail.
With sophisticated features such as the NHOOK hook keeper from Seaguide, this hook keeper, the hook is hung in the bow, as long as the line is on tension, it holds perfectly and the hook tip stays away from the blank. Other high-quality components come from Fuji are the a Fuji Alconite K-Series guide rings. These rings are lightweight, very quiet and optimize casting performance. Couple, with the Fuji TVS reel seat, which offers the combination of very pleasant ergonomics and optimized feedback. You can feel every pluck, even without a finger on the blank. To ensure that everything is better balanced, a handmade carbon piece has been installed in the handle. As a result, the rods sit perfectly in the hand and do not tire even during extremely long fishing sessions.
The LMAB Flagship Rodfather Bait Casting Rods give you a high-quality Casting Rods, which have only just been released after all the all requirements were met to the highest standard
- Bait Casting rods - 4 models in the range
- 40T Toray Carbon Blank
- Carbon cross winding above hand part for reinforced backbone
- Fuji Alconite K-Series ringing in Frosted Dark Grey
- Handmade carbon piece for better balance
- Fuji TVS Reel Holder
- Seaguide NHOOK Hook Holder
RF-C662ML
The lightest variant is suitable for finesse fishing for perch, but also performs well with small topwaterbaits and twitchbaits for perch, asp and chub. If you like to fish for perch with small spinnerbaits and bladed jigs, you will also like this rod.
RF-C702M
The all-round rod of the series. With it you are in good hands with most baits. Spinnerbaits, bladed jigs, twitchbaits and jerkbaits can be fished perfectly with it.
RF-C702MH
With this rod, developer Enrico Di Ventura particularly likes to hunt zander at night with larger plugs along the stone pack. But it can also be used for light pike fishing on the polder, where it masters not only hardbaits but also spinnerbaits and bladed jigs.
RF-C762H A medium-strength rod that is particularly suitable for pike fishing.
It can be used to fish from a boat or belly boat on polders as well as on larger bodies of water. It is ideal for the usual suspects for pike fishing such as medium-sized shads, various hardbaits and tin baits such as spinnerbaits.
RF-C762XH
The lightest of the "pure" pike rods. With it you can fish for large lures and with its Moderate Fast Action it is ideal for large spinnerbaits, chatterbaits, swimbaits and softbaits.
RC C782XXH
This is the middle of the pike rods. Max 150 g casting weight allows the use of large lures up to the first big baits. Whether spinnerbaits, swimbaits, softbaits or other large lures, thanks to the Moderate Fast action they can be cast and guided well - Please Note this rod has a different butt and handle section than all the other models - Extra EVA handle grips above and below the reel seat.
Back in In Stock Now!!!